Supply and installation of fire extinguishing systems
Supply and installation of fire extinguishing systems
Automated sprinkler systems
It is represented by network pipes and parts, such as threaded or welded pipes of various diameters, control valves, and sprinklers of various types and grades, all of which are approved.
Gas extinguishing systems
It is broadly classified into two categories: inert gases such as argon and nitrogen, and halocarbon compounds. Clean gas is one of the main fire extinguishing agents, as it does not conduct electricity, evaporates quickly, and leaves no residues upon evaporation.
Carbon dioxide gas extinguishes fire and does not conduct electricity. This is achieved through several automatic mechanisms, such as oxygen-deprived areas to which the system is applied, providing comprehensive fire suppression.
The Wet Chemical Fire Suppression System is used to protect commercial kitchens from potential hazards such as open flames, hot cooking surfaces, and large amounts of grease, oil, and gas. This system helps control fires by quickly suppressing grease fires and preventing them from spreading in the environment.
Foam extinguishing systems
It is an integrated foam system with concentrated foam, which is then sent to the foam mixing station, where the required foam is produced. The foam is discharged through specific exits and installed permanently with pumps, to protect areas that need to be safeguarded from danger, such as stalagmites.
It has one or two doors, either on the inside or outside wall, and is of red color, with its quality ensured.
Fire pump supply and installation are carried out according to the operation types and capacity requirements based on the project specifications.